contact units conditions 10kv form a 10kv form b 1 5kv form a contact materials rhodium tungsten rhodium tungsten tungsten isolation across contacts kv dc or ac peak 10 10 5 5 15 max. switching power w 50 50 50 50 50 max. switching voltage v dc or ac peak 1000 7000 1000 7000 10000 max. switching current a dc or ac peak 3 2 3 2 1 max. current carry a dc or ac peak 4 3 4 3 2 capacitance across contacts pf coil/screen grounded <0.2 <0.2 <0.2 <0.2 <0.2 lifetime operations dry switching 10 9 10 9 10 9 10 9 10 9 lifetime operations 50w switching 10 6 10 6 10 6 10 6 10 6 contact resistance mohms maximum (typical) 50 (15) 250 (100) 50 (15) 250 (100) 250 (100) insulations resistance ohms minimum (typical) 10 10 (10 13 ) 10 10 (10 13 ) 10 10 (10 13 ) 10 10 (10 13 ) 10 10 (10 13 ) coil at 20c 5v 12v 24v 5v 12v 24v 5v 12v 24v must operate v dc 3.7 9 20 3.7 9 20 3.7 9 20 must release v dc 0.5 1.25 4 0.5 1.25 4 0.5 1.25 4 operate time ms diode fitted 3.0 3.0 3.0 2.0 2.0 2.0 3.0 3.0 3.0 release time ms diode fitted 2.0 2.0 2.0 3.0 3.0 3.0 2.0 2.0 2.0 resistance ohms 28 150 780 38 240 925 16 95 350 construction isolation contact to coil kv dc or ac peak 17 17 17 insulation resistance contact to all other terminals ohms minimum (typical) 10 10 (10 13 ) 10 10 (10 13 ) 10 10 (10 13 ) environmental operating temperature range c -20 to +70 -20 to +70 -20 to +70 15kv isolation low contact resistance high power switching pcb or panel mount flying lead, solder turret and faston* style spade terminals options the d series is capable of withstanding voltages up to 15kv, the d series high voltage reed relay is suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies. two contact materials are available for low contact resistance or power switching applications. standard coil voltages of 5, 12 and 24 volts are available with form a and b contact configurations. printed circuit board (pcb) mount and panel mount (nylon studs) configurations available. optional electrical connections include solder turret tag, flying lead and faston* style spade terminals. d series high voltage reed relays 15kv, 50w iso 9001 c e rt i f i e d competitive part number cross-reference available at: www.cynergy3.com # # # # #
d series high voltage reed relays 15kv, 50w usa sales & tech support (866) 258-5057 email: sales@cynergy3.com cynergy3 components 2320 paseo de las americas, suite 104 san diego, ca 92154 europe - uk telephone +44 (0) 1202 897969 fax +44 (0) 1202 891918 email: sales@cynergy3.com cynergy3 components ltd. 7 cobham road ferndown industrial estate wimborne, dorset bh21 7pe iso9001 certified tm tm ? 2007 cynergy3 components, all rights reserved. specifications are subject to change without prior notice. cynergy3 components and the cynergy3 components logo are trademarks of cynergy3 components corp . "*other names and brands may be claimed as the propety of others." part numbering system reedswitch size - d d a t 7 24 15 f contact form - a: form a, b: form b contact material - r: rhodium, t: tungsten moulding reference number coil voltage - 05: 5v, 12: 12v, 24: 24v isolation between contacts - 10: 10kv, 15: 15kv (dat only) mounting style: no suffix: standard pcb mount f: flying lead contact terminals s: panel mount via nylon studs, faston * style spade terminals p: panel mount via nylon studs, turret contact/coil terminals mechanical dimensions all dimensions are in millimet re s (inches) 1 2 3 4 1 2 4 3 1 2 3 4 1 3 4 2 1 4 3 2 + - 2 mounting studs 4ba complete with nuts, nylon 66 form a (no) form b (nc) note: coil polarity is important for form b variant only. note: pins which are not numbered have no electrical connection. standard (e.g. dat71210) (e.g. dat71210p) panel mount (e.g. dat71210s) flying lead 60.0 (0.62") 18.5 (0.15") 25.4 5.1 10.2 (0.2") (0.4") (1.0") (2.0") (0.25") 6.3 (0.39") 10.0 25.4 (1.0") 9.5 (0.37") (2.0") 50.8 13.0 ~300 (12.0?) 4.0 (0.73") (2.36") 15.8 50.8 circuit diagrams (all variants) viewed from underside (2.0") 50.8 (e.g. dat71210f) spade type 3 4 2 mounting studs 4ba complete with nuts, nylon 66. requires 2x holes minimum 4.0mm. 1 2 's' suffix denotes the 0.250" 'push on' blade connectors, 4ba fixing bolts and epoxy potting. 2 pins 6.35 square 15.8 (0.62) 10.16(0.4?) 60.0 50.80 (2.0?) 4.0 18.5 (0.73?) 25.40 5.08 (0.2?) + - 1 48.00 11.60(0.46?) 11.0 (0.43?) 9.00 - + 1 30.0(1.18?) max (2.36?) (1.88?) (0.16?) (0.35?) (1.0?) (0.5?)
|
